2024/05/23
Warm congratulations to Yang Renwen of our company for winning the Provincial Labor Model award
Representatives of the 2024 Hebei Province Labor Model, Advanced Worker, and Advanced Collective.
2024/05/23
“The low-speed, high-torque rare earth permanent magnet motor we have developed and manufactured is a revolution in traditional asynchronous motors. Unlike the rotor of traditional asynchronous motors, which requires electrical excitation to generate a magnetic field, this motor directly installs rare earth permanent magnets in the rotor part. With rare earth permanent magnets, the rotor can be provided with a constant source of magnetic power.
2023/05/30
Causes and maintenance methods for motor overheating failure
In summer, the temperature is hot, and the ambient temperature is also high, so mechanical equipment and the like heat up quickly and have poor heat dissipation. Over-temperature is very detrimental to the insulation resistance of the motor. The motor is sensitive to heat in the stator winding insulation. Each insulation material can only withstand a certain temperature. Exceeding its allowable temperature will accelerate insulation aging and reduce the service life of the motor, and may cause various safety accidents due to insulation damage. Inspection, testing, and protection of motor over-temperature faults are very important for reducing the failure rate, reducing accident losses, and improving the economic benefits of enterprises.
2023/05/30
Causes and Maintenance Solutions for High-Voltage Motor Failures
There are many causes of failure in the use of AC high-voltage motors. In response to various failures, this article summarizes some treatment methods for the failures generated in the daily use of high-voltage motors, and proposes preventive measures to eliminate the failures of high-voltage motors in a timely manner, so that the failure rate of high-voltage motors is reduced year by year. What are the common faults of high-voltage motors? How should I deal with it?
2023/05/30
Benefits of Replacing Energy-Saving Motor Equipment for Enterprises
What happens if you use obsolete motors? Using motors that the state has ordered to be eliminated will not only result in fines and cessation of use, but the motors will also be confiscated, and in severe cases, it may lead to business rectification, which outweighs the gains. The Ministry of Industry and Information Technology and the State Administration for Market Regulation issued the "Motor Energy Efficiency Improvement Plan (2021-2023)", which proposed to guide enterprises to implement the renewal and upgrading of key energy-using equipment such as motors, give priority to the selection of high-efficiency energy-saving motors, and accelerate the elimination of backward and inefficient motors that do not meet the current national energy efficiency standards.
2023/05/30
In the actual production of manufacturing equipment, frequent starting of high-voltage motors, large vibrations, and large mechanical impact can easily lead to failures in the motor's circulating cooling system. So, what kind of bearing failures occur in high-voltage motors during operation?
2023/05/30
Introduction and Application Technology of High-Speed Motors
High-speed motors typically refer to motors with speeds exceeding 10000 r/min. High-speed motors are small in size, can be directly connected to high-speed loads, eliminate traditional mechanical speed-increasing devices, reduce system noise, and improve system transmission efficiency. Currently, the main types of motors that have been successfully implemented for high-speed applications include induction motors, permanent magnet motors, and switched reluctance motors. The main characteristics of high-speed motors are high rotor speed, high stator winding current and magnetic flux frequency in the iron core, and high power and loss densities. These characteristics determine that high-speed motors have key technologies and design methods that are different from ordinary speed motors, and the design and manufacturing difficulty is often many times greater than that of ordinary speed motors.
2023/05/30
What factors are important when purchasing materials for explosion-proof motors?
In the industrial sector, explosion-proof motors are important equipment used in hazardous environments, such as flammable gases, vapors, and dust. These environments may present risks of explosion and fire. Therefore, explosion-proof motors must be able to effectively prevent the generation of sparks and heat, thereby reducing the risk of explosion and fire.
Chengde Shengqian Special Motor Manufacturing Co., Ltd
Contact number: Manager Weng +86-15632496168
Sales Support: 400-6922168
Landline: +86-0314-6902557
QQ: 1804479978
Address: Longcheng Industrial Cluster Area, Yaowangmiao Village, Longxumen Town, Kuancheng Manchu Autonomous County, Chengde City, Hebei Province
Follow us
Copyright © Chengde Shengqian Special Motor Manufacturing Co., Ltd